Welcome to this guide
which sets out the correct use of the Movymia Pen
The Movymia Pen is made up of the following parts:
Pen cap, cartridge holder, housing, flange, threaded rod, display window,
push botton and dosage knob.
The needle cosist of the outer needle cap, inner needle cap, the pen needle itself
and the peel foil.
The Movymia cartridge completes the unite.
We will start by showing you how to use your Movymia Pen for the very first time.
Start by removing the pen cap.
If you’re changing a cartridge remove the empty cartridge first.
Now insert the new Movymia cartridge into the cartridge holder:
Metal cap first.
Using your finger carefully push back the threaded rod in a straight line
as far as it will go.
Next,
attach the cartridge holder to the pen housing
by rotating in 90° clockwise until it stops.
Now attach the needle to the pen
Start by pulling off the peel foil.
Now screw the needle clockwise onto the cartridge holder
making sure that the needle is attached correctly and firmly to the cartridge holder.
Remove and keep the outer needle cap
then remove and discard the inner needle cap
After insertion of a new cartridge, we do what is called “priming” of the cartridge.
This is also a functionality test of the pen
that is carried out before the first injection from a new cartridge.
Turn the dose knob clockwise until you see a droplet sign on the dose display.
Make sure that the two indicator strips are aligned.
During dose dialing, the pen will make an audible clicking sound
and you will feel some resistance.
Press the button down fully
and keep it pressed until the dose indication
has returned to the start position.
A few drops of liquid should emerge from the needle tip
If no drops emerge, repeat this last step until the drops emerge
(please note that this step should not be repeated more than 4 times).
The pen is now primed and ready for use as part of your daily routine.