Welcome to this guide
which sets out the correct use of the Movymia Pen.
The Movymia Pen is made up of the following parts:
pen cap, cartridge holder, housing,
flange, threaded rod, display window,
push botton and dosage knob.
The needle consists of the outer needle cap,
inner needle cap, the pen needle itself
and the peel foil.
The Movymia cartridge completes the unit.
We will start by showing you how to use your Movymia Pen for the very first time.
Start by removing the pen cap.
If you’re changing a cartridge, remove the empty cartridge first.
Now insert the new Movymia cartridge into the cartridge holder,
metal cap first.
Using your finger, carefully push back the threaded rod in a straight line
as far as it will go.
Next,
attach the cartridge holder to the pen housing
by rotating it 90° clockwise until it stops.
Now attach the needle to the pen.
Start by pulling off the peel foil.
Now screw the needle clockwise onto the cartridge holder
making sure that the needle is attached correctly and firmly to the cartridge holder.
Remove and keep the outer needle cap
then remove and discard the inner needle cap.
After insertion of a new cartridge, we do what is called “priming” of the cartridge.
This is also a functionality test of the pen
that is carried out before the first injection from a new cartridge.
Turn the dose knob clockwise until you see a droplet sign on the dose display.
Make sure that the two indicator stripes are aligned.
During dose dialling, the pen will make an audible clicking sound
and you will feel some resistance.
Press the button down fully
and keep it pressed until the dose indication
has returned to the start position.
A few drops of liquid should emerge from the needle tip.
aIf no drops emerge, repeat this last step until the drops emerge
(please note that this step should not be repeated more than 4 times).
The pen is now primed and ready for use as part of your daily routine.